Print Page - Example FPGA code for TE0713 using FT600 USB 3.0

Title: Example FPGA code for TE0713 using FT600 USB 3.0
Post by: zz0bcf on October 24, 2018, 07:02:00 PM

Hi,
Is there an example project for the FTDI USB3.0 IC (FT600) on the TE0713-01 / TE0703-05 boards. The FTDI website has some example verilog code for a streamer and loopback tests. They also have applications that would test the FT600 once the FPGA is programmed.

Any head start would be appreciated.

https://www.ftdichip.com/Products/ICs/FT600.html
https://www.ftdichip.com/Support/SoftwareExamples/FT60X.htm

Thanks.

Title: Re: Example FPGA code for TE0713 using FT600 USB 3.0
Post by: JH on October 26, 2018, 12:52:18 PM

Hi,
unfortunately we have no example for TE0713 at the moment. We have also no carrier at the moment, which supports the USB3 feature.

We have some sample for the same TF600 (without host PC software at the moment) for a other board:

https://wiki.trenz-electronic.de/display/PD/TEC0850+Test+Board

Maybe it helps to check the design there.
br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: zz0bcf on October 24, 2018, 07:02:00 PM