Print Page - Vivado IP block ZYNQ7 PS is not GP MASTER AXI block for trenz TE0715 SOM

Title: Vivado IP block ZYNQ7 PS is not GP MASTER AXI block for trenz TE0715 SOM
Post by: stressed_coder on January 05, 2023, 08:09:53 AM

Hi,

I am using trenz TE0701-06 carrier board with TE0715-04 SOM. My board part number in Vivado is XC7Z030sbg485-1. When I place ZYNQ PS in block design I do not get the following signals/pins on ZYNQ IP Block:

1) M_AXI_GP0
2) M_AXI_GP0_ACLK

I also checked on PS-PL configuration and could not even find GP Master AXI Interface settings. Why My ZYNQ is not GP MASTER AXI block?

Title: Re: Vivado IP block ZYNQ7 PS is not GP MASTER AXI block for trenz TE0715 SOM
Post by: Waldi3141 on January 05, 2023, 09:41:28 AM

Hi,

you should see and activate this AXI interface if you doubleclick on the ZYNQ7 PS IP under PS-PL Configuration -> AXI Non Secure Enablement -> GP Master AXI Interface -> M AXI GP0 Interface.

I recommend you to use our latest reference design 2021.2 and add your own application/IPs there -> https://wiki.trenz-electronic.de/display/PD/TE0715+Test+Board

Download here: https://shop.trenz-electronic.de/de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0715/Reference_Design/2021.2/test_board

good luck!

Title: Re: Vivado IP block ZYNQ7 PS is not GP MASTER AXI block for trenz TE0715 SOM
Post by: stressed_coder on January 05, 2023, 10:13:05 AM

Thanks a lot for solving my problem

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: stressed_coder on January 05, 2023, 08:09:53 AM