Recent posts

#1

MAX1000 community projects / Re: MAX1000 SDRAM chip

Last post by BR - April 24, 2025, 10:40:52 PM

Anyone?

For clarification it is the TEI0001-04-FBC84A MAX1000 board.

Kind regards!

#2

Trenz Electronic FPGA Modules / Re: I need help for Zynq and F...

Last post by Antti Lukats - April 24, 2025, 04:21:52 PM

we provide ready to use reference designs.
there are lots of Vivado resources on the web
bare-metal is not that recommended, but it is doable of course

#3

Trenz Electronic FPGA Modules / Re: Problem with TLK106 on TEO...

Last post by Antti Lukats - April 24, 2025, 04:20:11 PM

sorry we can not help with custom IP cores.

#4

Trenz Electronic FPGA Modules / Re: CR00103 Certus-NX LiteX no...

Last post by Antti Lukats - April 24, 2025, 04:09:37 PM

CR00103 only boots from SPI flash, so it should work. It for sure works when we test the modules.

#5

Trenz Electronic FPGA Modules / Re: Any idea?

Last post by Antti Lukats - April 24, 2025, 04:07:35 PM

Hi
You pretty much need to write your own IP cores, there is no example from us available.

#6

Trenz Electronic FPGA Modules / Re: TE0720 - Ethernet with LWI...

Last post by Antti Lukats - April 24, 2025, 04:04:34 PM

Hi
we really can not help out with LWIP issues. Sorry.

#7

Trenz Electronic FPGA Modules / Re: RasPi5 with Pironman5 flas...

Last post by Antti Lukats - April 24, 2025, 03:56:03 PM

RPi5 has different GPIO as much as we know, so there could be problems. Unfortunatly we can not help as the RPi application is not developed by us.

#8

Trenz Electronic FPGA Modules / Re: CR00103 Certus-NX LiteX su...

Last post by Antti Lukats - April 24, 2025, 03:54:28 PM

Indeed, we used verilog file generated for another board to make this demo, so we had no LiteX board support. It is still planned but no timeline when it may come.

#9

Trenz Electronic FPGA Modules / Re: How to setup CAN interface...

Last post by Antti Lukats - April 24, 2025, 03:52:53 PM

I am working on TE0818 board. I want to use CAN interface to send and receive data, Is there any guide or tutorial to setup this connection?

Are there any drivers needed to be installed separately? (CAN4Linux or SocketCAN)

I have petalinux 2022.2 in my board.

This is better answered on AMD forums, we have the hardware capability on the baseboard but no demo design for it.

#10

Trenz Electronic FPGA Modules / Re: Documentation inconsistenc...

Last post by Antti Lukats - April 24, 2025, 03:47:57 PM

sorry for no response. You have all valid points. In all cases it is documentation error.

B34 minimum voltage should be 1.5V
B13 VCCIO should not be mandatory
CLK pins in the page 5 are just wrong

our schematic has been fixed, but it may talk long until those changes come visible online.