Trenz Electronic GmbH Support Forum

Open Source => Open source hardware => Topic started by: Sherldonnnn on July 11, 2018, 11:34:18 AM

Title: How does 1N4148 Diode work
Post by: Sherldonnnn on July 11, 2018, 11:34:18 AM
I have 2 PWM ports, one generates 5V PWM and another at 3V. But only 1 will be generating at a time. However, their output is going to a same wire or pin. So, to avoid the current to pass into each other, I want to put diodes on each port as protection. For this, I would need fast switching diodes as PWM frequency is KHz or few MHz. I searched for fast switching diodes and found 1N4148. It does what I need but its forward voltage is 1V. So, for 3V and 5V, it will blow up ? or am I understanding the datasheet wrong ?
Right,as we see in the page name " Ten common electronic components that electronic engineers love (" ,With the development of semiconductor materials and technology, various semiconductor materials, doping distribution and geometric structure have been developed, and many kinds of crystal diodes with various kinds of structure and different functional applications have been developed.Crystal diode is a semiconductor devices at both ends of solid-state electronic devices. The main features of these devices are nonlinear current voltage characteristics.

I read in this answer that forward voltage is voltage drop ? so if its voltage drop, whats the max voltage that it can support ? also 3V will come out as 2V, so I will be required to level it up to 3V again, right ?
Title: Re: How does 1N4148 Diode work
Post by: StefQM on November 08, 2019, 10:33:58 AM
Some comments: