News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

te0713 pinout tracelength unit

Started by xilinxpadawan, May 13, 2022, 11:30:15 AM

Previous topic - Next topic

xilinxpadawan

Hi, we are designing a custom carrier pcb for TE0713-01. 4x5 Modules pinout/trace length excel file is used as the reference file during custom carrier pcb design which is available as follows:

https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Pinout

4x5_series_pinout_tracelength.xlsx
Größe 15,06 MB / Geändert 14.03.2022 - 11:28:53

However, module trace length unit is not specified explicity at the .xlsx file B2B_pin table tab as below:

https://ibb.co/V9Cdw5f

unit for trace lengths is available at the CONN_pin_table as below after the carrier is selected:

https://ibb.co/mbHD1Fz

Module trace length match for different pins between two tables. Also, module trace length unit is available as mm for other modules such as 3.5x7.3_series_pinout_tracelength.xlsx

However, we want to be sure about the module trace length unit and also it is better for the Trenz community. Can you confirm that module trace length unit is also mm for the B2B_pin table?


Best
Xilinxpadawan

JH

Hi,
for the sake of completeness here again the answer as with your email(without screenshots :-) ):
You are right, B2B page did not show the unit, but Conn_Pin does(select simple another carrier and you see also values of TE0713 separately there). Yes, both pages are mm.
br
John