Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: lalit on February 12, 2021, 04:10:15 AM

Title: FMC breakout board for TEBF0808-04A
Post by: lalit on February 12, 2021, 04:10:15 AM
I'm looking for FMC breakout board to be used on TEBF0808-04A.
Is there something that is available off the shelf.
Thanks.
Title: Re: FMC breakout board for TEBF0808-04A
Post by: JH on February 12, 2021, 05:49:23 AM
Hi,
you mean something like this:
https://shop.trenz-electronic.de/en/23575-HW-FMC-XM105-G-Debug-Card
br
John
Title: Re: FMC breakout board for TEBF0808-04A
Post by: lalit on February 12, 2021, 06:10:35 PM
Yes, something like that card but will need to connect to TEBF0808-04A. I actually need access to GTH pins that is on this connector.
XM105 does not have these pins wired to the connector.
Thanks.
Title: Re: FMC breakout board for TEBF0808-04A
Post by: JH on February 12, 2021, 07:44:26 PM
GTH are high speed, what did you try to connect?
br
John
Title: Re: FMC breakout board for TEBF0808-04A
Post by: lalit on February 12, 2021, 09:16:06 PM
I'm connecting a 3.125Gbps SERDES interface to the SOM and need access GTH lanes and these lanes are not wired on XM105.
Would there be another FMC card which provide to GTH lanes. I'm using TE0803 SOM with TEBF0808-04A.
Title: Re: FMC breakout board for TEBF0808-04A
Post by: JH on February 15, 2021, 08:23:17 AM

We have some FMC to SFP card:
https://shop.trenz-electronic.de/en/TEF0008-02-FMC-Card-with-four-SFP-10-GBit-ports
Where you has access to 4 GTH.

Simple breakout card is not really suitable for the speeds, so I think you would not find some. Maybe  create one by yourself?

br
John