Print Page - Problems while writing FSBL on ZynqBerry

Title: Problems while writing FSBL on ZynqBerry
Post by: kampi on November 30, 2020, 12:56:40 PM

Hello,

I want to flash a customized FSBL version on the ZynqBerry but I have an issue with the default Xilinx bootloader (I have only changed the boot mode to JTAG). The write process will stuck because of some unknown reason during the flash initialization.

Title: Re: Problems while writing FSBL on ZynqBerry
Post by: JH on November 30, 2020, 07:18:47 PM

Hi,
which Vivado version did you use?

With Vivado 19.x an newer it depends on the Flash content, which fsbl you must use for flash programming, see:
https://wiki.trenz-electronic.de/pages/viewpage.action?pageId=105689937

br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: kampi on November 30, 2020, 12:56:40 PM