Trenz Electronic GmbH Support Forum

Trenz Electronic Products => UltraScale => Topic started by: aida on July 12, 2018, 12:30:49 PM

Title: TE0808 - I2C MIO configuration
Post by: aida on July 12, 2018, 12:30:49 PM
Hi!

I am using the TEBF0808 Carrier and I would like to configure the si534x Clock Generator on the TE0808 Module. I was looking through the schematics of both the module and the carrier but I couldnt find to which MIO pins the I2C should be routed. I saw that this is possible because the FSBL of the example design is configuring the si534x Clock Generator.

Thanks!

Regards,
Aida
Title: Re: TE0808 - I2C MIO configuration
Post by: JH on July 13, 2018, 08:49:29 AM
Hi,


it's only I2C0(38..39) enabled.  I2C0 is connected over TEBF0808 i2C mux on SI5345. See also FSBL Template code from the reference design.

br
John