Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: bigguiness on March 29, 2023, 05:33:38 PM

Title: TE0720 - how to boot from QSPI with rootfs in flash
Post by: bigguiness on March 29, 2023, 05:33:38 PM
Hello all,

I have a working setup for my TE0720 + custom carrier board that currently is booting from a SD Card.

I would now like to change it so the system boots from QSPI and uses a rootfs on the flash.

Is there are information on how to do this?

Thanks
Title: Re: TE0720 - how to boot from QSPI with rootfs in flash
Post by: JH on March 30, 2023, 01:43:35 PM
Hi,
this depends on the petalinux version....we have some older project where we have done this one time:
https://wiki.trenz-electronic.de/display/PD/TE0720+HDMI701

for details you must check AND(Xilinx) documentation for your petalinux version .
br
John