Hi,
I am using trenz TE0701-06 carrier board with TE0715-04 SOM. My board part number in Vivado is XC7Z030sbg485-1. When I place ZYNQ PS in block design I do not get the following signals/pins on ZYNQ IP Block:
1) M_AXI_GP0
2) M_AXI_GP0_ACLK
I also checked on PS-PL configuration and could not even find GP Master AXI Interface settings. Why My ZYNQ is not GP MASTER AXI block?
Hi,
you should see and activate this AXI interface if you doubleclick on the ZYNQ7 PS IP under PS-PL Configuration -> AXI Non Secure Enablement -> GP Master AXI Interface -> M AXI GP0 Interface.
I recommend you to use our latest reference design 2021.2 and add your own application/IPs there -> https://wiki.trenz-electronic.de/display/PD/TE0715+Test+Board
Download here: https://shop.trenz-electronic.de/de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0715/Reference_Design/2021.2/test_board
good luck!
Thanks a lot for solving my problem