Hi,
I have downloaded "TEI0001-test_board-quartus_19.1.0-20200707153205.zip" and executed "create_project_win.cmd".
I selected TEI0001-02-08-C8 and pushed "Create project" button.
But I got some error messages as follows.
Info: Adding uart [altera_avalon_uart 19.1]
Info: Parameterizing module uart
Info: Building connections
Info: Parameterizing connections
Info: Validating
Info: Done reading input file
Error: NIOS_test_board.onchip_flash: Must assign a valid Device for Altera Onchip Flash megafunction.
Error: [TE_DES-30] Script (TE::QUART::generate_qsys) failed:
Error: [TE_TK-11] (TE) Script (TE::DES::run_project) failed: .
My Quatus environment is as follows.
Quaturs Prime Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
Nios 2 software build Tool for Eclipse Version: Mars.2 Release (4.5.2) Build id: 20160218-0600
What is necessary to create project?
Thank you.
Hi,
did you install the device support file for the MAX 10 FPGA?
br
Thomas
Thank you for your prompt reply :).
I found that device support file was not installed.
I will install it and try again.
Many thanks.
Hi,
I have installed device support file and try again.
"Must assign a valid Device for Altera Onchip Flash megafunction." message is disappeared,
and I got another error messages :'( as follows.
Info: [TE_SDK-10] Create app -> done
------------------------------
Info: [TE_SDK-23] Modify sdk files. Please wait ...
Error: [TE_DES-64] Script (TE::SDK::modify_sdk_files) failed: couldn't open "C:/********/project/test_board/software/test_board/Makefile": no such file or directory
Error: [TE_DES-31] Script (TE::DES::run_sw_project) failed:
Error: [TE_TK-11] (TE) Script (TE::DES::run_project) failed: .
Info: [TE_DES-62] 'Create Project' GUI closed.
I find that there is no "Makefile" on my workspace "C:/********/project/test_board/software/test_board/"
and "TEI0001-test_board-quartus_19.1.0-20200707153205.zip" doesn't contain "Makefile".
Could you give me some advice about this problem?
Thanks.
Hi,
are you using Win10? If yes, did you install Windows Subsystem for Linux (WSL), like described here (Chapter 2.3.1): https://www.intel.com/content/www/us/en/programmable/documentation/esc1425946071433.html#puq1561069548076 ? It's needed for Nios II EDS.
Can you send me the whole log file, please? You'll find it in the log folder.
br
Thomas
Thanks for your reply :)
I have confirmed that WSL is installed(ubuntu18.04 LTS) and Nios II EDS can be launched from Quatus menu Tools->Nios 2 software build Tools for eclipse(Mars.2 Release (4.5.2)).
I will attach my log file.
Sorry to bother you.
Hi,
you're using wsl 2. You have more problems using Nios II EDS with wsl 2 than with wsl 1, so it's better to change to wsl 1. The scripts of this project should work with wsl 1.
Follow the steps below, to change wsl 2 to wsl 1:
- Open PowerShell as Administrator
- run command: wsl --set-default-version 1
- run command: wsl --set-version Ubuntu-18.04 1
- check, if wsl 1 is assigned to ubuntu 18.04 with command: wsl -l -v
Then try again to create the project for your MAX1000.
br
Thomas
Thanks for your reply.
I successfully created the project file!!
Thank you very much!!