Text only | Text with Images

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: omikron88 on September 11, 2016, 04:35:08 PM

Title: How to program bitfile/debug TE0726 ZynqBerry under Linux
Post by: omikron88 on September 11, 2016, 04:35:08 PM
Hello,

I have installed Vivado 2016.1 in Ubuntu.
How can I program the FPGA and debug the ARM executable from there?
Title: Re: How to program bitfile/debug TE0726 ZynqBerry under Linux
Post by: Antti Lukats on September 12, 2016, 01:26:51 PM
you can configure PL (FPGA) over the usb jtag (on board on TE0726)
you can debug PS (ARM over the usb jtag (on board on TE0726)

You can do it from either windows or linux.
on linux you must make sure the FTDI stuff is installed correctly, there are notes about it at xilinx.com, we ourself do not use any debugging from linux hosts
Text only | Text with Images