Text only
|
Text with Images
Trenz Electronic GmbH Support Forum
Archived Boards and Threads => Archived Boards => FAQ Trenz Electronic FPGA Modules => Topic started by: Thorsten Trenz on May 21, 2010, 09:05:52 PM
Title:
When downloading via parallel JTAG programmer to FPGA, programming fails
Post by:
Thorsten Trenz
on
May 21, 2010, 09:05:52 PM
Q: When downloading via parallel JTAG programmer to FPGA, programming fails with Error: "'1' : Programming terminated. DONE did not go high"
Try setting the mode pins to JTAG-only. A bug in certain Xilinx iMPACT versions can cause this.
Text only
|
Text with Images