Print Page - Remote update(Field update) of SPI flash memory in TE0712

Title: Remote update(Field update) of SPI flash memory in TE0712
Post by: Varun on July 03, 2018, 10:39:24 AM

Hi,

I am using TE0712(Artix 7 200T) Micromodule and TE0702 carrier board.

From Vivado, I am able to create the mcs for SPI flash and program through JTAG.

But I need to do remote update for SPI flash memory in FPGA module.
I am having the Microcontroller module that is connected to FPGA through SPI interface.

SETUP:From Microcontroller through SPI interface, FPGA will receive the new mcs file for updating SPI flash memory.

I would like to know, whether is it possible to update the SPI flash memory using above setup or any change is required for doing this update?

Thanks,
Varun

Title: Re: Remote update(Field update) of SPI flash memory in TE0712
Post by: JH on July 03, 2018, 11:03:18 AM

Hi,
you mean configure FPGA from over remote PC, yes? You can easily use Xilinx software. See:

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2017_4/ug908-vivado-programming-debugging.pdf (https://www.xilinx.com/support/documentation/sw_manuals/xilinx2017_4/ug908-vivado-programming-debugging.pdf)

Otherwise see also:

https://www.xilinx.com/support/documentation/application_notes/xapp1081-quickboot-remote-update.pdf

br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: Varun on July 03, 2018, 10:39:24 AM