Hello,
I have a TE0712 100T that I would like to change the default input and output clock, while leaving others default.
Using the clockbuilder tool, I have configured the input clock to a 100 MHz differential coming from IN1/IN2.
In addition, I want CLK2 to be configured as a 100 MHz clock going to the GTP pins.
For CLK1A and CLK3, I want to keep it as the default 50 MHz clock.
My question is, what are the default settings for CLK1A and CLK3 I should use with the clockbuilder tool?
I have attached screenshots of my current clockbuilder configuration below. Is my current configuration correct?
Regards
Andrew
(https://i.imgur.com/o1vG8Rd.png)
(https://i.imgur.com/rzczNmA.png)
(https://i.imgur.com/AfXoQI4.png)
Hello,
yes, this looks good.
Defaults settings are also listed on TE0712 TRM:
- https://wiki.trenz-electronic.de/display/PD/TE0712+TRM#TE0712TRM-Clocking (https://wiki.trenz-electronic.de/display/PD/TE0712+TRM#TE0712TRM-Clocking)
br
John
Thanks for the settings. It helped me a lot.
Thank you for the confirmation John, and you are very welcome Lalitnut.