Recent posts

#11

CYC1000 community projects / Re: I present a comunity of IN...

Last post by Subcritical - April 03, 2024, 07:00:20 PM

How to compile manualy without github knowledge, An ATARI STE implementation from MiST - Spanish - :

The implementation is ported by @somhi:
https://github.com/AtlasFPGA/MiSTery

#12

CYC1000 community projects / Re: I present a comunity of IN...

Last post by Subcritical - April 02, 2024, 05:28:09 PM

Yoomp! ATARI 800XL Captured from HDMI with sound.

Tutorial 1 porting ZX Spectrum 48k in vhdl - Spanish -

Tutorial 2 porting ZX Spectrum 48k in vhdl - Spanish -

#13

Trenz Electronic FPGA Modules / Re: Si5338 TE0713

Last post by ame - March 26, 2024, 04:09:12 PM

Hi,
I use the TE0712 project but to have a clean project and for documentary quality reasons, I would like to have the original TE0713 project.
TE0713 use only two output, TE0713 four. But I could have a functional design.

Thank you for your quick reply.
Regards

Hi,
project is included into the reference design download, see post from Manuela:--> Follow Wiki Download Link:
https://wiki.trenz-electronic.de/display/PD/TE0712+Test+Board#TE0712TestBoard-Download
br
John

#14

Arrow USB Programmer2 / Linux, Quartus Programmer - JI...

Last post by rchemin - March 25, 2024, 02:03:44 PM

Hello,

One of our product includes a TEI-0005 module⁽¹⁾ from Trenz Electronic.
This module is used as an on-board USB to JTAG blaster allowing the end user to configure an Intel® Agilex® FPGA.

We performed tests with Quartus Programmer 23.4, Windows 10 and Linux Ubuntu 22.04 LTS OS versions.

For Ubuntu OS, we downloaded the driver and followed the instructions for installation.

Volatile (.sof) configuration works with both Windows and Ubuntu OS.
>> But the non-volatile (.jic) configuration does not work with Ubuntu OS. The flash memory configuration results in a fail...

Our product also includes a connector for plugging in an external JTAG probe (Altera USB-Blaster II, etc.).
JIC programming works with the Altera's JTAG probe and Ubuntu 22.04 LTS.
>> But it does not work with an Arrow's JTAG probe⁽²⁾ and Ubuntu 22.04 LTS...

We think that both solutions: TEI-0004 and TEI-0005 have problem with Quartus Programmer for Ubuntu OS.
Can you confirm? Help us with this issue?

(1) FPGA USB-Programmer2 SMD Module
(2) FPGA USB-Programmer2 JTAG (Arrow) for development with Intel FPGAs

Thank you,

Best regards,

Rémi CHEMIN
<removed JH>

#15

MAX1000 community projects / Re: Playing ZX Spectrum in HDM...

Last post by Subcritical - March 23, 2024, 06:58:17 PM

And playing some new demos:
"Elysium State"

"In Color by Darklite and Offence"

#16

Trenz Electronic FPGA Modules / Re: Flash memory on TE0710 fro...

Last post by JH - March 21, 2024, 12:07:13 PM

Hi,
we have a reference design with QSPI online, where QSPI is included, also into petalinux example:
https://wiki.trenz-electronic.de/display/PD/TE0710+Test+Board
br
John

#17

Trenz Electronic FPGA Modules / Flash memory on TE0710 from Mi...

Last post by gapbesides - March 21, 2024, 08:02:19 AM

I attempted to use QSPI to write to the module's flash memory, but I'm having trouble getting the right data to be stored there. The written data has incorrect bytes at the beginning.
I made every effort to see if the page alignment of the memory was the cause of the issue, but I was unable to resolve it even by moving the address I obtained from figuring out the start address of a page. Does anyone have any past writing experience with this device?

#18

Trenz Electronic FPGA Modules / Re: Si5338 TE0713

Last post by JH - March 13, 2024, 02:07:46 PM

Hi,
project is included into the reference design download, see post from Manuela:

For the TE0712 series we have a reference design with the Si5338A-B which you can find in the following link
 - https://wiki.trenz-electronic.de/display/PD/TE0712+Test+Board

You can then find the corresponding clock-builder reference project in
 - <project_folder>\test_board\misc\PLL\SI5338

--> Follow Wiki Download Link:
https://wiki.trenz-electronic.de/display/PD/TE0712+Test+Board#TE0712TestBoard-Download
br
John

#19

Trenz Electronic FPGA Modules / Re: Clock on TE0715-05-51I33-A

Last post by MA - March 08, 2024, 08:28:28 AM

Hi Michael,

we will answer you by email.

br

#20

Trenz Electronic FPGA Modules / Re: Si5338 TE0713

Last post by ame - March 05, 2024, 01:48:06 PM

Hello,

I need to configure TE0713 si5338. I'm looking for TE0713 clock-builder project.

Thank you for your help.
Regards