Hi,
I wanted to know if an example design exists for the TEBF0808 carrier board in which the XXV_Ethernet subsystem (10gigE) is working? We are trying to make it work on our custom carrier board with a TE0803 xzcu4eg without success and we would like to troubleshoot our problem against a working hardware. I see the TEBF0803 has a SFP+ connector on it, connected to the same fpga mtg pins as our design so it would be perfect to test with the board. Our minimal test design for the 10gige has proven to work on a zcu102 board, but there exist several variants between the two (mainly the soc, for exemple). I can't seem to find this getting started vivado project anywhere on trenz website.
Thank you!
Ops, never mind.. I realized that the TE0803 is not compatible with the TEBF0803 for the SFP+ connector; bank 228 for TE0803 is not routed to the SFP+ connector.