Print Page - Board files for TE0723-03M

Title: Board files for TE0723-03M
Post by: eshazen on March 10, 2017, 05:31:23 PM

Hello-

I just received my TE0723-03M. I notice that the board file has at least one incorrect pin assignment.
The on board LED was assigned to H11 while on the schematic it is connected to G14.

Is there an updated board file for the -03M revision? Are there any other differences?

(I am using the te0723-02m file from the "test_board" design I find on the download area).
I'm using Vivado 2016.4.

Thanks!

Title: Re: Board files for TE0723-03M
Post by: JH on March 10, 2017, 07:43:38 PM

Hello,

thanks for pointing that out. New version of the reference design (te0723-test_board-vivado_2016.2-build_09_20170310193113.zip) with fixed 2016.2 board part should be available in appr. 1 hour.

I think not, see changes on last page of https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/TE0723/REV03/Documents/SCH-TE0723-03M.PDF

But I will check all pins after embedded world next week and upload a 16.4 reference design.

br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: eshazen on March 10, 2017, 05:31:23 PM