Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Evaluation Boards => EDDP-EDPS Support => Topic started by: jinyu on March 20, 2018, 02:05:51 PM

Title: problem when run Vivado HLS example
Post by: jinyu on March 20, 2018, 02:05:51 PM

I try to use vivado HLS run the  example in the foder IIoT-EDDP/design_hls/Clarke_Directto create a IP core.
I double click the vivado_hls.app  to open the vivado HLS project but I can't run C simulation ,because the "run C simulation button was grey , (http://the%20button%20was%20grey.png)
and then I try to creat a new project:
1.creat new project
2.add files and set top function

3.add c-based testbench files:test_clark_direct.cpp
4.run C Simulation

5.after a while a window pop up with the information:vivado HLS C simulation could not complete... there is 1 error
(http://errorsim%20211-100.png)

I must make some mistakes ,can anyone help me ?

best regards
Title: Re: problem when run Vivado HLS example
Post by: JH on March 21, 2018, 02:34:56 PM
Hi,

which Vivado version did you use? 2017.1?

PS: Simulation was not tested for this IP template. Does only simulation fails?

br
John
Title: Re: problem when run Vivado HLS example
Post by: jinyu on March 22, 2018, 12:55:54 AM
only simuliation falls ,the version of vivado is 2017.1,thank for you help .

best regards
Title: Re: problem when run Vivado HLS example
Post by: JH on March 22, 2018, 08:13:06 AM
Hi,
i was not involved in this project, but I think testbench is missing for simulation and simulator settings. If you try to simulate, you must create your own one.
br
John
Title: Re: problem when run Vivado HLS example
Post by: Jason bourne on November 01, 2022, 06:15:18 AM
If you want to generate IP cores through HLS, add solution to the current project so that you can compile and generate ip cores.