Print Page - Reference designs for 2020.2

Title: Reference designs for 2020.2
Post by: joseer on January 20, 2021, 10:11:29 AM

Hello,

I'm working with the TE0803 and TE0807 SOMs also using the TEBF0808 carrier, is there any plans to update the reference designs to 2020.2, for those?

Thanks.
Br
Jose

Title: Re: Reference designs for 2020.2
Post by: JH on January 21, 2021, 07:05:59 AM

Hi,
yes updates are planned.
But I can't tell you any timeline at the moment. I must find at first some solution for petalinux 20.2 --> petalinux flow has changed a little bit. I will try to find a good solution for this changes at first. At the moment I can't automatically export kernel or uboot receipts after changes with petalinux config menue to the user layer like it was done on 19.2, so I must create manually receipts. I think this is not practicable so I try to find a solution for this problem.

I've start to update documentation to 20.2, in case you want to try out it by yourself (19.2 board files works with 20.2):
https://wiki.trenz-electronic.de/display/PD/Xilinx+Development+Tools
https://wiki.trenz-electronic.de/display/PD/Vivado
https://wiki.trenz-electronic.de/display/PD/PetaLinux

br
John

Title: Re: Reference designs for 2020.2
Post by: joseer on January 21, 2021, 12:34:19 PM

Hi John,

Looking forward to see the updates and the solution for this 'newer' xilinx approach.

Thanks for the info and the links, I'll have a look.

Br
Jose

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: joseer on January 20, 2021, 10:11:29 AM