Hi,
Need help , Now I have go through the implementation, then generated the bitstream successfully , I don't konw what should do the next. ,please give me
some advice .
here is my procedure :
1. click File > export > export hardware
2. click File > Launch SDK
3.If there have a Arty z7020 board then I should use JTAG connect my hardward to my laptop
4. In SDK , right click zsys_wraper_hw_platform_0 > program FPGA
is it right ? don't know much about fpga , any help would be appreciate
best regards
It looks like you're working on the HLS project.
The steps you did are not necessary. Please use the following TCL commands:
TE::hw_build_design
TE::sw_run_hsi
These commands generate the file "BOOT.BIN". You can find description of these commands at https://wiki.trenz-electronic.de/display/PD/Project+Delivery .
You can either use the prebuilt Petalinux image file "image.ub" or build your own customized version by following the instructions in https://wiki.trenz-electronic.de/display/PD/PetaLinux+KICKstart .
Copy these two files to the SD card and boot the Arty Z7-20 from it. That's all.
Yes you are right. it is the HLS project ,thanks for your reply ,you have solved my problems .but Next step I want to transplant it on my zedboard platform so I don't know if
the TCL command are works .
best regards
Hi,
TE::hw_build_design
is nearly the same like press "Generate Bitfile" on Vivado GUI
TE::sw_run_hsi
is script based form of SDK: export HDF, open SDK, include local repository, generate applications, FSBL...Boot.bin
for Linux&Uboot you must use HDF with petalinux and generate this files with the template petalinux project. Use SDK to generate Boot.bin with FSBL, bitfile and uboot.elf.
See: https://wiki.trenz-electronic.de/display/PD/Project+Delivery
br
John
HI, John
OK, I understand ;D 。 and I had installed the TCL command with your help .It will save a lot of time for me ~ thank you very much~
best regards