When i test the imx219 on TE0726, I found that there is a led on imx219 and the led is on. I wonder know that is that once the led is on when camera is connected or when the camera is working. If the led is not on, is it indicates that the camera is not worked?
Hi,
without knowing the schematic of your imx219, I assume that the LED is connected to pin 12 of the connector. This is connected to a GPIO on the TE0726, which is not used but is pulled up by default. This means that the LED lights up as soon as the FPGA is supplied with power.
Best regards,
Manuela