Author Topic: Gowin FPGA  (Read 553 times)

szm3

  • Active Member
  • *
  • Posts: 2
Gowin FPGA
« on: January 14, 2019, 06:31:14 AM »
Does trenz have this producument?I cannot find it.

Oleksandr Kiyenko

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 351
Re: Gowin FPGA
« Reply #1 on: January 14, 2019, 09:47:33 AM »
Hello,

this board is already in production. Soon it will be in the shop. But you can order it now. Please send email to sales@trenz-electronic.de for order and support@trenz-electronic.de for schematics.

Best regards
Oleksandr Kiyenko

szm3

  • Active Member
  • *
  • Posts: 2
Re: Gowin FPGA
« Reply #2 on: January 14, 2019, 10:12:36 AM »
Hello,

this board is already in production. Soon it will be in the shop. But you can order it now. Please send email to sales@trenz-electronic.de for order and support@trenz-electronic.de for schematics.

Best regards
Oleksandr Kiyenko
Thanks for your reply,I got it!

frankbuss

  • Active Member
  • *
  • Posts: 1
Re: Gowin FPGA
« Reply #3 on: April 03, 2019, 11:38:48 AM »
I just bought this board. It came with a note, see attached scan, which says I should go to arrow.com/support for support, but I can't find the board there. The "TEC0017 Getting Started" entry in the Trenz wiki is empty as well. I installed already the Gowin YunYuan EDA software, but now I'm stuck. Is there a sample project to blink the LEDs or something and a manual how I use the EDA software to flash it?

And next I would like to use the integrated SDRAM of the FPGA. Is there a sample project for this board which demonstrates how to use the SDRAM?

Antti Lukats

  • Sr. Member
  • ****
  • Posts: 494
    • Trioflex
Re: Gowin FPGA
« Reply #4 on: April 07, 2019, 03:55:03 PM »
Hi,

this board is made by us alone, no relation to Arrow at all, so we will check why this notice was attached to the shipment/package.

We have some internal demo code, will be online soon.

br
Antti Lukats