Carrier for TE0710 that supports both ethernets..

[donpost]

Hi,

I was wondering if you have a carrier for the TE0710 that breaks out both Fast Ethernet ports?

Thanks!

[Oleksandr Kiyenko]

Hi,

please check https://wiki.trenz-electronic.de/display/PD/4+x+5+SoM+Carriers

BR
Oleksandr

[JH]

Hi,
on our current 4x5 carrier 4 lanes for Gbit ETH are connected to on ETH connector.
So with TE0710  and the both Fast Ethernet (one lane for every phy), they will be connected to the same ETH connector.
So with default ETH cable only ETH0 should works.

What you can do:  Connect a modified ETH cable, where you split the two 100MBit lane to separate lanes.
We have no example online at the moment, but I think this can work.

So maybe you can try out this with TE0703 carrier. Schematics:

• https://shop.trenz-electronic.de/de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0710/REV02/Documents
• https://shop.trenz-electronic.de/de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0703/REV05/Documents

br
John

[donpost]

Thanks for the replies!!  I'll look into the solutions suggested..

-Don