Author Topic: Using Xilinx Compatible TE0790-02 with Xilinx products in Vivado  (Read 203 times)

ndaksu

  • Active Member
  • *
  • Posts: 1
Hello,

When I tried to connect my Xilinx FPGA to Vivado 2016.1 by using TE0790-02, I saw my FPGA as an Unknown_Device on the Hardware Manager. However, I couldn't see the same problem when I used Xilinx JTAG Emulator which was provided by originally Xilinx. What would be the problem of TE0790-02 usage at this application? Screenshot of Vivado Hardware Manager is attached.

Regards

JH

  • Hero Member
  • *****
  • Posts: 641
Re: Using Xilinx Compatible TE0790-02 with Xilinx products in Vivado
« Reply #1 on: July 16, 2018, 08:43:00 AM »
Hi,
unknown Device is CPLD. Ether this  on the TE0790 or on from our modules.
Wwhich DIP switch settings did you use onTE0790? S2-1 must be on to route JTAG through TE0790 CPLD, see:
Which carrier and module did you use?

br
John