Author Topic: How does the TE0722 board run the Standalone app in SPI Flash?  (Read 107 times)

wg88719

  • Active Member
  • *
  • Posts: 1
How does the TE0722 board run the Standalone app in SPI Flash?
I looked at these two pages, but still don't know how to start the app.
https://wiki.trenz-electronic.de/display/PD/DDR+less+ZYNQ+Design
http://www.wiki.xilinx.com/Zynq-7000+AP+SoC+Boot+-+Booting+and+Running+Without+External+Memory+Tech+Tip
Please help me, thank you very much.

JH

  • Hero Member
  • *****
  • Posts: 590
Re: How does the TE0722 board run the Standalone app in SPI Flash?
« Reply #1 on: July 16, 2018, 08:55:43 AM »
Hi,

you must create everything by yourself (use BD with Zynq setup from 722 and add PL IPs from the description, create FSBL without DDR and XIP mode, create SW with SDK with changed Linker Flags) from the instructions for TE0722 setup instead of the Xilinx example.
For XIP mode see also:
I will try to implement this on the next reference design update for Vivado 2018.2, but we have a lot of modules, so I need a little bit time.

br
John