Identify TE0712 and TE0713

[lantionik]

Hello. I have the same project on TE0712 and TE0713. TE0712 and TE0713 are very similar so it was very simple to do this. What is a simple way to identify TE0712 and TE0713 with verilog code without seeing them. For example a pin that is stuck at 0 in one board and stuck to 1 in the other? Thank you. Have a nice day.

[JH]

Hi,
is the same FPGA(in case you use same assembly option) but not the same module
TE0713 has FTDI for USB,  TE0712 has ETH PHY, SI5338 I2C is connected to other IOs...
Currently available assembly option:

   
• https://shop.trenz-electronic.de/en/products/Trenz-Electronic/TE07XX-Artix-7/

Schematics:

   
• https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0712/REV02/Documents

   
• https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0713/REV01/Documents

Other Documentation:

   
• https://wiki.trenz-electronic.de/display/PD/TE0713+Resources
• https://wiki.trenz-electronic.de/display/PD/TE0712+Resources

brJohn

[lantionik]

Thanks for the help!