Author Topic: When downloading via parallel JTAG programmer to FPGA, programming fails  (Read 4779 times)

Thorsten Trenz

  • Administrator
  • Full Member
  • *****
  • Posts: 151
    • Trenz Electronic GmbH
Q: When downloading via parallel JTAG programmer to FPGA, programming fails   with Error: "'1' : Programming terminated. DONE did not go high"

Try setting the mode pins to JTAG-only. A bug in certain Xilinx iMPACT versions can cause this.
« Last Edit: June 10, 2010, 02:44:12 PM by Thorsten Trenz »