Author Topic: TE0820 PHY Leds  (Read 5438 times)

ignacio.moreno

  • Active Member
  • *
  • Posts: 12
TE0820 PHY Leds
« on: December 04, 2017, 09:08:30 AM »
Hello everyone,

I have an issue regarding the PHY Led signals of the TE0820 Module:

According to the pinout excel table, PHY_LED0 goes to pin C8 of the Zynq and PHY_LED1 goes to CPLD pin 17. Is this pin 17 connected to some pin of the Zynq? Is this signal used? I would like to have it on the PL to send it to an actual led...

Thanks in advance,
I. Moreno

JH

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1969
Re: TE0820 PHY Leds
« Reply #1 on: December 04, 2017, 09:48:55 AM »
Hello,

yes, you can use it. See:
It's connected on our 2017.2 example design, see description:br
John

ignacio.moreno

  • Active Member
  • *
  • Posts: 12
Re: TE0820 PHY Leds
« Reply #2 on: December 04, 2017, 10:13:56 AM »
Hi John,

thanks for the quick response!

Regards
Ignacio