Si5338 Default ClockBuilder Configuration for TE0712

[goli12]

Hello,

I have a TE0712 100T that I would like to change the default input and output clock, while leaving others default.
Using the clockbuilder tool, I have configured the input clock to a 100 MHz differential coming from IN1/IN2.
In addition, I want CLK2 to be configured as a 100 MHz clock going to the GTP pins.

For CLK1A and CLK3, I want to keep it as the default 50 MHz clock.

My question is, what are the default settings for CLK1A and CLK3 I should use with the clockbuilder tool?
I have attached screenshots of my current clockbuilder configuration below. Is my current configuration correct?

Regards
Andrew

[JH]

Hello,
yes, this looks good.
Defaults settings are also listed on TE0712 TRM:

   
• https://wiki.trenz-electronic.de/display/PD/TE0712+TRM#TE0712TRM-Clocking

br
John

[Lalitnut]

Thanks for the settings. It helped me a lot.

[goli12]

Thank you for the confirmation John, and you are very welcome Lalitnut.