TE0741 programming with xc3sprog

[Rtg]

I am trying to program TE0741 and the flash with xc3sprog.  But it shows the error that 'XC7K160T' can't be programmed (snip attached).  But I saw that Kintex 7 was in the list of supported hardware of xc3sprog.   Also, what are the constraints to be used for the flash programming?

[Rtg]

Link to the bscan file: https://github.com/matrix-io/xc3sprog/blob/master/bscan_spi/bscan_xc7_spi.vhd
Link to supported hardware list: http://xc3sprog.sourceforge.net/hardware.php
Link to the constraints file from resource: https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/TE0741/Reference_Design/14.7/TE0741-02.ucf

[Rtg]

Hi. xc3sprog still gives the same error.  But I was able to find the top file and constraints file. https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/TE0741/Reference_Design/14.7/XS3SPROG

I am not sure why they would be there if the board was not meant to be programmed using xc3sprog. Any suggestions anybody?

[JH]

Hi,
why do you need xc3sprog?

You can use Xilinx tools to program Flash or FPGA device. Use SDK or Vivado HW-Manager: https://wiki.trenz-electronic.de/pages/viewpage.action?pageId=14746264#Vivado/SDK/SDSoC-XilinxSoftwareProgrammingandDebugging

br
John