TEF1002-02 with TE0820-05

[harrx]

Hello,

I am trying to work with the PCIe Carrier board -> TEF1002 with the TE0820 module. I am stuck at the very begining as the module is not recognized by Vivado Hardware Manager. It sees the Carrier board, but says "No devices connected to the target." I used both the Jtag/ uart and the Xilinx programmer methods.
I see 2 power supply lights on the carrier board and one blinking green light on the Module FPGA, but no Jtag connection. 

I tried the TE0820 module with a custom Carrier Board, and it was detected fine as "xczu3" by Vivado H/W Manager.

Is there any Jumper setting which needs to be taken care of for the Jtag connection (I am using the default) or does it look like a connection problem. How to move forward from here.