News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

TE720 + Custom motherboard. Connect SDIO WP and CD signals ?

Started by mgillott, January 09, 2017, 02:17:11 PM

Previous topic - Next topic

mgillott

Hi

I am designing a custom motherboard for my project, but using the TE0701 as a guide for the few I/O that I need

I see on the TE0701 the WP and CD signals form the SD Card socket are routed to the CPLD. I do not see that they are connected through to the TE720

On the reference TE720 Vivado project I see these signals are routed to EMIO but not actually connected.

Do I have to make any provision for WP and CD signals in order to a) boot from SD Card, and b) Access SD from petalinux?

Thanks
Malcolm Gillott

JH

Hi,

on TE0701 SD-WP and SD-CD goes to Baseboard CPLD. Functionality is CPLD-Version dependents.
Card detect is used to switch Boot Mode of the Module FPGA. On the newest CPLD Firmware both Pins are also available from PL via CPLD RGPIO Interface.
You found basic Firmware description on:
https://wiki.trenz-electronic.de/display/PD/TE0701+CPLD
https://wiki.trenz-electronic.de/display/PD/SC-CPLD-Firmware

br
John