Author Topic: TE0323-00  (Read 11026 times)

imoddsp

  • Active Member
  • *
  • Posts: 7
TE0323-00
« on: September 21, 2010, 11:50:01 AM »
Dear Sir,
I  have brought the TE0323-00-EV02B. I need to know if you have any program for me to get started.  I am currently having problem with getting the
USB connected to the PC and also do not know where to start.
WOuld appreiciated if you could shed some light.

Thank you and best regards

Thorsten Trenz

  • Administrator
  • Full Member
  • *****
  • Posts: 155
    • Trenz Electronic GmbH
Re: TE0323-00
« Reply #1 on: September 21, 2010, 12:05:51 PM »
Hello,
we would need some more information, what your difficulties are.

I suppose you already read the USB section in the manual, and you did install the drivers as described there?
Did you get any error messages?

I also suppose, you did download the reference design?

best regards
Thorsten Trenz

imoddsp

  • Active Member
  • *
  • Posts: 7
Re: TE0323-00
« Reply #2 on: September 21, 2010, 12:27:32 PM »
first an for most, the PC did not recognise the TE0320 board that is mounted on the TE0232.
any suggestion as to what is the likely casue ?

Thorsten Trenz

  • Administrator
  • Full Member
  • *****
  • Posts: 155
    • Trenz Electronic GmbH
Re: TE0323-00
« Reply #3 on: September 21, 2010, 01:20:59 PM »
Please describe your setup.
- How do you supply power to the board?
- Did you install the drivers?

best regards
Thorsten Trenz

imoddsp

  • Active Member
  • *
  • Posts: 7
Re: TE0323-00
« Reply #4 on: September 21, 2010, 01:26:11 PM »
power from power supply 5 V.
found that the base board is faulty. any suggestions as to what cause it to malfunction ?

Thorsten Trenz

  • Administrator
  • Full Member
  • *****
  • Posts: 155
    • Trenz Electronic GmbH
Re: TE0323-00
« Reply #5 on: September 21, 2010, 01:30:36 PM »
Hi,
I really need more information. Without information, I will not be able to help.

What exactly is faulty? If possible make a photo of your setup, and sent it to info@trenz-electronic.de

best regards
Thorsten Trenz

imoddsp

  • Active Member
  • *
  • Posts: 7
Re: TE0323-00
« Reply #6 on: September 22, 2010, 10:43:27 AM »
Is it possible for me to send the base board to you to let you check what is the problem ?

Would you be able to send me some sample programs and also documentation to get me jump start.

Danke
Thank you and best regards

Thorsten Trenz

  • Administrator
  • Full Member
  • *****
  • Posts: 155
    • Trenz Electronic GmbH
Re: TE0323-00
« Reply #7 on: September 22, 2010, 11:00:26 AM »
Is it possible for me to send the base board to you to let you check what is the problem ?

Yes, of course. Please contact sales@trenz-electronic.de for further procedure.

  Would you be able to send me some sample programs and also documentation to get me jump start.
 
The reference design is a working example, and it is also documented. Did you download it?

The cores used in the reference design are documented here:
http://docs.trenz-electronic.de/Optomotive/intellectual%20property/

A simpler example can be found here:
http://docs.trenz-electronic.de/Trenz%20Electronic/TE0323%20-%20prototyping%20carrier%20board%20for%20TE0320/
But it relies on extra hardware, so it will not run on your setup.

best regards
Thorsten Trenz

Horsa

  • Full Member
  • ***
  • Posts: 145
  • Trenz Electronic GmbH
    • Trenz Electronic GmbH
Re: TE0323-00
« Reply #8 on: September 22, 2010, 11:13:07 AM »
For the TE0323, you can have a look here:
  http://docs.trenz-electronic.de/Trenz Electronic/TE0323 - prototyping carrier board for TE0320/
For the whole TE0320 series, we just added some reference videos here:
  http://docs.trenz-electronic.de/Trenz Electronic/TE03xx - TE0300 series/

Regards,
 - Horsa