Author Topic: Memory transfer speed on the zynqberry  (Read 8607 times)


  • Active Member
  • *
  • Posts: 14
Memory transfer speed on the zynqberry
« on: June 14, 2016, 02:13:12 PM »
Hello everyone,

If I want to figure out the speed (theoretical maximum) of the memory on the zynqberry (128MB version), is the following the correct approach ?

memory clock: 533MHz
Bus width:       16bits     (2bytes)
DDR -> Double data rate memory. 2 memory operations possible per cycle: Multiply by two

533MHz * 2B * 2(because DDR) = 2132MB/s

It is mainly the DDR issue I wonder about.

Thank you and best regards
« Last Edit: June 14, 2016, 03:26:04 PM by svenssonjoel »

Andrei Errapart

  • Jr. Member
  • **
  • Posts: 56
Re: Memory transfer speed on the zynqberry
« Reply #1 on: June 22, 2016, 02:50:38 PM »
Should be correct.

In practice, the speed of the memcopy performed by CPU is in the order of 200 Mbyte/sec and drops only a little when the FPGA initiates DMA transfers at a rate of 400 Mbyte/sec concurrently.