Author Topic: TE0720-2 startup pin state  (Read 2936 times)


  • Active Member
  • *
  • Posts: 1
TE0720-2 startup pin state
« on: April 19, 2016, 09:58:09 PM »
During power up I would like for the pins to be held in a low state. To do this PUDC_B needs to be pulled high. Currently PUDC_B appears to be pulled low, so the outputs are all high during power up.

According to the TE0720-2IF schematics, PUDC_B appears to be directly tied to the CPLD. Is there a way to reprogram the SC so that this pin is pulled high?