TE0723-02 Drawing file

[leirbag]

Hi admins,

It is difficult to figure out the header number ID (J1, J2, etc.) and its pinout in other place than the board itself. Unfortunately, this info not appear in the TE0723-02 Drawing file, http://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/TE0723/REV02/Hardware%20Design/AD-TE0723-02.PDF

Is there any chance to show this info at this file or in another new one?

Than you in advance,

Gabriel Solsona

[Thorsten Trenz]

Hi,
will this help?
https://wiki.trenz-electronic.de/display/OSHW/TE0723

In any case we will add the header information in the assembly drawing. It will get updated soon.

Best Regards
Thorsten Trenz

[leirbag]

Dear Thorsten,

First of all, thank you indeed for the promptly answer. About the alternative you have proposed, I must say that I was aware of this page but regrettably it does refer to the first version. I mean, for instance, the PMOD header does not exist.

I beg you address this issue as fast as you can, due to we need to work with such information intensively in these days.

Once more time, thank you very much,

Gabriel Solsona

[Antti Lukats]

will be updated, the assembly diagrams generated from CAD do not show the headers that are set as "not mount" in schematic we look what we can do to add the info

[leirbag]

If updating https://wiki.trenz-electronic.de/display/OSHW/TE0723 is the easiest way for you, it is ok for us too!

Thank you!

[Antti Lukats]

what info you miss the most? the pinout is in schematic, what is missing, are the measurements for the placement of the added pmod connector only

[leirbag]

Well, at this moment, pinout and header enumeration in a sketch would be enough.

But in the near future and if everything goes well, we'll need to design an auxiliary piggyback PCB on top of the TE023 so, coordinates placement of the headers will be needed.

At your convenience!

Thank you again, Antti!

[Thorsten Trenz]

Hi,
its here now:
http://www.trenz-electronic.de/de/download/d0/Trenz_Electronic/d1/TE0723/d2/REV02.html

Best Regards
Thorsten Trenz

[leirbag]

Awesome!

Enough!

Thank you so much!

Gabriel Solsona