Up-to-date TE0720 BSP workflow

[boul]

Hello,
we started working with the TE0720 module a few weeks ago.
So far, we've been using the bsp supplied here:
http://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/TE0720-GigaZee/reference_designs/petalinux-2014.2/beta-release/TE0720-2014.2-beta-1.bsp.gz
and used it directly in petalinux (with success).
Now we would like to be able to re-generate the bsp file from Vivado but we're a bit confused about the various versions of the Vivado provided files (The BSP guide tells to use Vivado 2014.2, but the Vivado files from the trenz git repo are apparently for 2013.4 or 2014.1)
I tried to follow the TE0720 Petalinux BSP Guide (using Vivado 2014.2) but I'm not even able to find the IP core archive mentioned in the very first step.
So, to summarize:
- what version of Vivado and Petalinux should we use now ?
- what is the workflow we should be following to re-generate a bsp from Vivado (software versions, files places...) ?

Thanks for your help !

[Antti Lukats]

Hi

http://www.trenz-electronic.de/de/download/d0/Trenz_Electronic/d1/TE0720-GigaZee/d2/BSP/d3/Vivado.html

Vivado board part files for 2014.4
there is also a small IP core that helps to connect the I2C bus to RTC and PHY LEDs
(maybe takes an hour til the download comes visible)

petalinux BSP coming in the next few days.

We are not supporting vivado board part flow or petalinux earlier than 2014.4

https://wiki.trenz-electronic.de/display/PD/Vivado+Board+Files