TE0630 micromodule + Xilinx tools 13.2

[Freng]

Hi all,
I'm using a TE0630 module (Spartan-6 XC6SLX75) + a demo carrier board TE0304.
I move to a fresh new computer and Xilinx tools are driving me crazy...
I have a Webpack license for 13.2 tools. While ISE projects found on Trenz git repo work fine, EDK/XPS fail (in fact, "license does not contain a XPS feature" + "xc6slx75 is not a Wepack part" errors).

I ask the question on Xilinx forums, but their answer is not clear to me.

XC6SLX75 device should be compatible with a Webpack license (http://www.trenz-electronic.de/products/fpga-boards/trenz-electronic/te0630-spartan-6-series.html)

Am I missing something ?

PS : my computer configuration
Ubuntu 12.04 LTS
Xilinx tools 13.2

Regards, 
Freng.

[Thorsten Trenz]

Hi,
EDK is not included in WebPack, so you need a license if you want to use it.
http://www.xilinx.com/tools/platform.htm

best regards
Thorsten Trenz

[Lavesh]

Hi Freng.

I think if you will install evaluation version in place of Webpack, you would be able to use EDK feature for 30 days.

I also need help from your side.

Actually, I'm new to trenz TE0630 module and want to build a simple USB interface.

I have downloaded documents and have programmed .iic file.

I want to start with a simple project to transmit control signal from PC and to receive back some predefined / pre programmed data on my PC as per transmitted control signal.

Could you please guide me ?
I am not getting any sample software to test my VHDL USB code.

Please guide.

Regards
Lavesh

Hi all,
I'm using a TE0630 module (Spartan-6 XC6SLX75) + a demo carrier board TE0304.
I move to a fresh new computer and Xilinx tools are driving me crazy...
I have a Webpack license for 13.2 tools. While ISE projects found on Trenz git repo work fine, EDK/XPS fail (in fact, "license does not contain a XPS feature" + "xc6slx75 is not a Wepack part" errors).

I ask the question on Xilinx forums, but their answer is not clear to me.

XC6SLX75 device should be compatible with a Webpack license (http://www.trenz-electronic.de/products/fpga-boards/trenz-electronic/te0630-spartan-6-series.html)

Am I missing something ?

PS : my computer configuration
Ubuntu 12.04 LTS
Xilinx tools 13.2

Regards, 
Freng.

[Freng]

Hi Thorsten,
my fault, I set up the wrong license on my side, sorry for the disturbance...
Best regards,
Freng.