News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

TE600 JTAG programming

Started by tare_izo, April 07, 2014, 11:16:32 AM

Previous topic - Next topic

tare_izo

Hello,

I have TE600-02 and TE603 carrier board and I am experiencing difficulties to download .bit file into the FPGA. I am using Digilent HS1 JTAG-usb cable.
When I open ISE iMPACT and try to download file I get next message :

INFO:iMPACT - Current time: 7.4.2014 11:08:11
PROGRESS_START - Starting Operation.
INFO:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '1':  Device IDCODE :        00001111111111111111111111111111
INFO:iMPACT:1579 - '1': Expected IDCODE:    00000100000000010001000010010011
PROGRESS_END - End Operation.

Elapsed time =      0 sec.

I would appreciate any help or tips.
Thank you.

Tarik.

Oleksandr Kiyenko

Hello,

Usually such behaviour caused by bad cable connection.
Do you able to see chip in iMPACT on start ?
Do you have correct power supply for your board ?

Best regards
Oleksandr Kiyenko

tare_izo

Hi Oleksandr,

Yes I can see my chip in iMPACT after Boundary Scan (see attachment). Only after I click to program chip I get message of IDCODE mismatch.
For power supply I am using  9V DC adapter connected to power connector J13.

I bought JTAG cable from Digilent
http://digilentinc.com/Products/Detail.cfm?NavPath=2,395,922&Prod=JTAG-HS1

Thank you.
Regards.

Tarik.