Programming cables for TE0600-01 and TE0630-00

[JEisenbraun]

Hi,

The documentation states that the following programming cables should be used for the TE0600-01.

Digilent XUP USB-JTAG Programming Cable (XUP-USB-JTAG)
or
Xilinx Platform Cable USB II (HW-USB-II-G)

Is the Digilent JTAG HS1 Programming Cable also supported?  It's a little cheaper than the Digilent XUP USB-JTAG Programming Cable and it looks like it provides the same capabilities (unless I'm missing something).

Also, for the TE0630-00, the doc just has a link to the JTAG programming cables.

Does that mean that ANY of the programming cables will work with this module?

Thanks!
John

[Thorsten Trenz]

Dear John,
JTAG HS1 is also suitable, it is recognized by the newer ISE versions. Please see here: http://forum.trenz-electronic.de/index.php/topic,133.0.html
Currently, we sell only cables suitable for Xilinx FPGA's. They all work with all Xilinx based modules, but please take a look if the connectors match the boards. If you have any doubt on a certain combination, please ask.

best regards
Thorsten Trenz