News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

Si5338 TE0713

Started by ame, March 04, 2024, 02:07:37 PM

Previous topic - Next topic

ame

Hello,

I'm trying to configure SI5338. I getback the TE0712 ClockBuilder project, but it looks the schematic changed. The termination resistor R49 has been add on clk3 (200MHZ) and remove on CLK (125MHz).
Should I change the format output on clock builder pro?
Could you provide your clock-builder reference project?

I'm using Vhdl project https://github.com/steffenmauch/SI5338-VHDL but I obtain 87.63MHz instead of 100MHz.

Regards

ame

Quote from: ame on March 04, 2024, 02:07:37 PMHello,

I'm trying to configure SI5338. I getback the TE0712 ClockBuilder project, but it looks the schematic changed. The termination resistor R49 has been add on clk3 (200MHZ) and remove on CLK (125MHz).
Should I change the format output on clock builder pro?
Could you provide your clock-builder reference project?

I'm using Vhdl project https://github.com/steffenmauch/SI5338-VHDL but I obtain 87.63MHz instead of 100MHz.

Regards
(The Schematic change from TE012 to TE013.)

MA

Hello,

what exactly do you want to do? TE0712 and TE0713 are two different series and therefore cannot be compared 1:1.

For the TE0712 series we have a reference design with the Si5338A-B which you can find in the following link
 - https://wiki.trenz-electronic.de/display/PD/TE0712+Test+Board

You can then find the corresponding clock-builder reference project in
 - <project_folder>\test_board\misc\PLL\SI5338

We do not currently have a reference design for the TE0713 series that includes the Si5338.

Best regards,
Manuela

ame

Hello,

I need to configure TE0713 si5338. I'm looking for TE0713 clock-builder project.

Thank you for your help.
Regards

JH

Hi,
project is included into the reference design download, see post from Manuela:
QuoteFor the TE0712 series we have a reference design with the Si5338A-B which you can find in the following link
 - https://wiki.trenz-electronic.de/display/PD/TE0712+Test+Board

You can then find the corresponding clock-builder reference project in
 - <project_folder>\test_board\misc\PLL\SI5338
--> Follow Wiki Download Link:
https://wiki.trenz-electronic.de/display/PD/TE0712+Test+Board#TE0712TestBoard-Download
br
John

ame

Hi,
I use the TE0712 project but to have a clean project and for documentary quality reasons, I would like to have the original TE0713 project.
TE0713 use only two output, TE0713 four. But I could have a functional design.

Thank you for your quick reply.
Regards

Quote from: JH on March 13, 2024, 02:07:46 PMHi,
project is included into the reference design download, see post from Manuela:--> Follow Wiki Download Link:
https://wiki.trenz-electronic.de/display/PD/TE0712+Test+Board#TE0712TestBoard-Download
br
John


JH

Hi,
sorry for TE0713 we have only older ClockBuilder Desktop project, which is not longer avaliable from Skyworks.
Start with TE0712 project and configure reconfigure outputs to:
Quote/Internal feedback enabled
//Output Clock 0
// Output is off
//Output Clock 1
// Output is off
//Output Clock 2
// Output Frequency (MHz) = 125.000000000
// Mux Selection = IDn
// MultiSynth = 20  (20.0000)
// R = 1
//Output Clock 3
// Output Frequency (MHz) = 200.000000000
// Mux Selection = IDn
// MultiSynth = 12  1/2  (12.5000)
// R = 1
//Driver 0
// Disabled
// Powered off
// Output voltage = 3.30
// Output type = 3.3V LVDS
// Output state when disabled = StopLow
//Driver 1
// Disabled
// Powered off
// Output voltage = 3.30
// Output type = 3.3V LVDS
// Output state when disabled = StopLow
//Driver 2
// Enabled
// Powered on
// Output voltage = 1.80
// Output type = 1.8V LVDS
// Output state when disabled = StopLow
//Driver 3
// Enabled
// Powered on
// Output voltage = 1.80
// Output type = 1.8V LVDS
// Output state when disabled = StopLow

I can send you also this older project file, when you write to support@trenz-electronic.de, in case you still need these files. Rework with newer Tool chain is still on our TODO List, but I can't  tell you any timeline at the moment.
br
John