TE0790 under virtual box Ubuntu Guest

[pema]

Hi there,
this is most likely a issue caused by VirtualBox rather than the TE0790. But perhaps someone is experiencing the same issue and knows a work around.
Since I perform most of the development under a virtual machine, I would also like to have access to the JTAG probe under Linux virtual machine.

The problem:
When I connect the TE0790 to the VM I am able to connect through the xsdb or xsct but not able to list the targets( bellow you find the output).

Code Select Expand

ubuntu@ubuntu-VirtualBox:~$ lsusb
Bus 001 Device 003: ID 0403:6010 Future Technology Devices International, Ltd FT2232C/D/H Dual UART/FIFO IC
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
ubuntu@ubuntu-VirtualBox:~$ xsdb
rlwrap: warning: your $TERM is 'xterm-256color' but rlwrap couldn't find it in the terminfo database. Expect some problems.
                                                                                                                                             
****** System Debugger (XSDB) v2023.1
  **** Build date : May  7 2023-15:13:35
    ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.
    ** Copyright 2022-2023 Advanced Micro Devices, Inc. All Rights Reserved.


xsdb% connect                                                                                                                                 
attempting to launch hw_server
                                                                                                                                             
****** Xilinx hw_server v2023.1
  **** Build date : May  7 2023 at 15:13:34
    ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.
    ** Copyright 2022-2023 Advanced Micro Devices, Inc. All Rights Reserved.

INFO: hw_server application started
INFO: Use Ctrl-C to exit hw_server application

INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121

tcfchan#0
xsdb% targets                                                                                                                                 
xsdb%      

Under Windows Host this does not happens:

Code Select Expand


C:\Xilinx\Vitis\2022.2\bin
λ .\xsct

****** Xilinx Software Commandline Tool (XSCT) v2022.2.0
  **** SW Build 0 on 2022-10-13-12:09:39
    ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.


xsct% connect
tcfchan#0
xsct% targets
  1  PS TAP
     2  PMU
     3  PL
  4  PSU
     5  RPU (Reset)
        6  Cortex-R5 #0 (RPU Reset)
        7  Cortex-R5 #1 (RPU Reset)
     8  APU (L2 Cache Reset)
        9  Cortex-A53 #0 (APU Reset)
       10  Cortex-A53 #1 (APU Reset)
xsct%

Anyone having the same issue? I can of course be always switching between VM and Host  to developt and flash or debug. But like I said is quite tedius to switch between both.

Greetings

[JH]

Hi,
as I know this can happens and I didn't have a solution.
Here they recommend to install cable drivers again:
https://support.xilinx.com/s/question/0D52E00006hphZuSAI/jtag-not-working-on-virtual-box-ubuntu-1604?language=en_US

I use AMD(Xilinx) tools with WSL:
https://wiki.trenz-electronic.de/display/PD/AMD+Tools+and+Win10+WSL
In this case there is there is a trick, which maybe also works on virtual box(but I didn't expect it).
Start HW_Manager.exe on WinOS (C:\Xilinx\Vivado\<vivado version>\bin\unwrapped\win64.o\hw_server.exe). In case the server is running, Vivado from WSL automatically connect to the HW server and JTAG is availabe.
br
John

[pema]

Hi John,
many thanks for your reply .
I am posting here a solution that worked for me... for posterity  :-)
All you need is either Xilinx Vivado/Vitis or petalinux in my case.

Code Select Expand


$ cd ~/petalinux/2022.2/tools/xsct/data/xicom/cable_drivers/lin64/install_script/
$ sudo ./install_drivers
$ sudo ./setup_pcusb
$ sudo su -
$ cd /etc/udev/rules.d
$ sed -i -e 's/MODE=/MODE:=/g' 52-xilinx*.rules
$ exit
$ sudo udevadm control --reload
#optional
$ echo "alias xsct="$HOME"/./petalinux/2022.2/tools/xsct/bin/xsct" >> ~/.bashrc
$ echo "alias xsct="$HOME"/./petalinux/2022.2/tools/xsct/bin/xsdb" >> ~/.bashrc


Test it.

Code Select Expand

$ xsct
rlwrap: warning: your $TERM is 'xterm-256color' but rlwrap couldn't find it in the terminfo database. Expect some problems.
                                                                                                                                             
****** Xilinx Software Commandline Tool (XSCT) v2022.2.0
  **** SW Build 0 on 2022-10-05-18:51:07
    ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.


WARNING: sdtgen package cannot be loaded. System Device tree commands will not                                                               
be available
xsct% connect                                                                                                                                 
tcfchan#0
xsct% targets                                                                                                                                 
  1  PS TAP
     2  PMU
     3  PL
  4  PSU
     5  RPU (Reset)
        6  Cortex-R5 #0 (RPU Reset)
        7  Cortex-R5 #1 (RPU Reset)
     8  APU (L2 Cache Reset)
        9  Cortex-A53 #0 (APU Reset)
       10  Cortex-A53 #1 (APU Reset)