News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

TE0725 3.3v power supply pins.

Started by Trenz0691, January 18, 2023, 05:13:52 PM

Previous topic - Next topic

Trenz0691

Hi
Should be pin 5 & 46 of both J1 and J2 powered with external 3.3v supply  in order to power up the module TE0725?
Is it also possible to power up the module by supplying only 3.3v to pin 5 of JB1, JTAG/uart connector? 
Thanks

Waldi3141

Hi,
supplying 3,3V to one of those Pins is normally enough to power up the board.
Yes 3.3V can also be supplied over JB1 (mind the power rating of the supply, TE0790 is not suitable here for delivering power)

good luck!

Trenz0691