News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

TE0715-4 and usb 1-1 device descriptor read/64, error -71

Started by RobbieT, January 09, 2023, 09:02:51 AM

Previous topic - Next topic

RobbieT

Hi, I'm having trouble getting USB to work under petalinux 2018.2
Board used is TE0715-04-15-2I , carrier board is TE0701.

when plugging is USB flash card (tried multiple), the following happens:

1. lsusb -t reporting shows normal : Bus01.Port1: Dev 1, Class=root_hub, Driver=ci_hdrs/1p, 480M
2. next , errors start showing up: (multiple times)
usb1-1 ; device descriptor read/64, error -71
usb usb1-port1: unable to enumerate USB device.

also in dmesg the errors show up after message:
usb1-1: new low-speed USB device number 4 using ci_hdrc
usb1-1: device not accepting address4, error -71

can you please guide me in solving the error -71 usb issue?

Thanks in advance,
Robbie


JH

Hi,
can you try out prebuilt binaries of our newest reference design for your assembly variant:
https://wiki.trenz-electronic.de/display/PD/TE0715+Test+Board
Put files from your assembly variant on SD and boot from SD. Do you see the same error there?
br
John

RobbieT


RobbieT

Did full unstall of 2021.2 Xilinx system and ubuntu and used the prebuit files for the board.
Unfortunately the same USB error keep on showing.

dmesg shows again:

usb1-1: new low-speed USB device number 4 using ci_hdrc
usb1-1: device not accepting address4, error -71

so, with 2021.2 and prebuit images, same issue persists.

Could it be a hardware issue?

Thanks,
Robbie

Waldi3141

it might sound farfetched but you could try another 12V power supply. I once had a similar problem caused by the power supply,
best regards
waldi

RobbieT

Hi Waldi, thanks for the suggestion. Just tried another model of PSU and - as indeed farfetched - no difference. Errors still persist

JH

Hi,
can you send serial number of the module and the carrier to support@trenz-electronic.de.
Serial numbers are on the small stickers with QR Code.

br
John

RobbieT

TE0715_04_15_2I : srnr. 537378
TE0701_06 : srnr. 555190




JH

Quotecan you send serial number of the module and the carrier to support@trenz-electronic.de.
;-)
but no matter.
537378  is from 4.2019
555190 is from  4.2019
I think something is maybe damaged.
We also offer a repair service, here are the conditions and the application form
https://www.trenz-electronic.de/en/Repair-Policy
If you want to use this service, we would need both the module and the carrier and we would need to know which power supply and USB stick you used

br
John

RobbieT

Thanks for your kind offer. I Indeed guessed something had to be wrong maybe on hardware.

I have also tried with anothet TE0715 module serial 537381 and the same behaviour, so I'm expecting the carrier.
Will go through check (microscope) this weekend.

Thanks for support and keep you posted.
Robbie

RobbieT

Final update. replaced L87 and cleaned traces to USB with flux on the TE0701 board.
Most probably due to usage issue on this carrier board from my side.
All is operational now and USB stick are recognized. (also under original 2018.2 build).
Many thanks for your support.


Waldi3141

nice to hear that :)
Thanks for presenting your solution!