Author Topic: From TEBF0808-04A To TEB0911-04  (Read 643 times)

mt-user-2019

  • Active Member
  • *
  • Posts: 16
From TEBF0808-04A To TEB0911-04
« on: December 21, 2021, 06:18:51 PM »
Hello,

My question is more xilinx tools oriented but since it is involving 2 Trenz product I try her first


We have developed the a huge part of our FPGA project on a  TEBF0808-04A + TE0803.

We need to continue the project on a TEB0911-04 (for ressources and FMC port reason).

Is there an easy way to either :

1. Open TEB0911's project and import the block design from the TEBF0808
or
2. Open the TEBF0808's project and 'change' the board settings to the TEB0911 board's settings
or
3. open to solution/idea


Thanks you in advance.
BR
M






mt-user-2019

  • Active Member
  • *
  • Posts: 16
Re: From TEBF0808-04A To TEB0911-04
« Reply #1 on: December 29, 2021, 01:13:37 PM »
Hello,

I come here to give one solution that I found.

1. Open the TEBF0808's project
2. file > project > save as
3. chose a name and location
4. in project manager > project summary > project part 'click'
5. project settings>general >project device > click on the ' ... '
6. Here for me I could not see TEB0911's board so I had to go to tools settings > board repository and find out where was the board description
7. when the tool let you do something again double click on the IP : zynq that is in your diargam and > presets > apply  configuration > (go in the trenz TEB0911's board exemple and export the preset.. this is the one that you want to appy)
8. verify because not everythings was correct


Voila now you have a project with a new board device that should work

Regards