Hi,
I am trying to connect via JTAG to the TEBF0808 board to program TE0808. The modules TE0808 and TE0790 are already inserted on the TEBF0808 board.
I am using:
- TEBF0808 board ->
https://wiki.trenz-electronic.de/display/PD/TEBF0808+TRM - Xilinx Zynq Ultrascale+ MPSoC module TE0808 ->
https://wiki.trenz-electronic.de/display/PD/TE0808+TRM - "XMOD FTDI JTAG Adapter - Xilinx compatible" TE0790 ->
https://wiki.trenz-electronic.de/display/PD/TE0790+TRM - Mini-USB B connector to connect TE0790
- AC Adaptor 12V/2A to supply the TEBF0808
- Xilinx Vivado 2020.1 version
- Windows 10 OS
Now, DIP-switches on the TEBF0808 board are in the positions:
- S4-1 -> OFF - S5-1 -> ON
- S4-2 -> OFF - S5-2 -> ON
- S4-3 -> OFF - S5-3 -> OFF
- S4-4 -> ON - S5-4 -> OFF
And DIP-switch on the TE0790 for access to MPSoC module (J12) is in the position:
- S2-1 -> ON
- S2-2 -> OFF
- S2-3 -> OFF
- S2-4 -> OFF
In the Vivado, when i click Open Hardware manager-> Open target-> Auto Connect, I get the message "No devices detected on target localhost:3121/xilinx_tcf/Digilent/251633059873A".
Any tips and suggestions to resolve this issue would be very helpful to me.
Best regards,
Bernardo Mendes