Community > CYC1000 community projects

CYC1000 Dimensions

(1/2) > >>

sjoshi:
I am looking for the exact dimensions of the CYC1000. More importantly, the exact placement of the PMOD and MKR headers. The dimensions file on the website does not include the PMOD header, hence this post. Could someone please post the exact positions of the headers here?

JH:
Hi,
did you checked this document:
https://shop.trenz-electronic.de/en/TEI0003-02-CYC1000-with-Cyclone-10-FPGA-8-MByte-SDRAM?path=Trenz_Electronic/Modules_and_Module_Carriers/2.5x6.15/TEI0003/REV02/Documents
--> DIM-TEI0003-02.PDF
it includes dimensions and possition of the pmod(center point). Is this enough for you?

br
John

sjoshi:
That will be enough. So the centre line of the mounting holes and the PMOD connecter is the same. Also the PMOD is placed centrally on the board. Is that correct?

JH:
Hi,

--- Quote ---So the centre line of the mounting holes and the PMOD connecter is the same.
--- End quote ---
Not directly, its a little bit shifted, so that the connector sleeve is flush with the module.

--- Quote ---Also the PMOD is placed centrally on the board. Is that correct
--- End quote ---
yes

br
John

sjoshi:
Ok. To avoid any confusion, can you please confirm that the point marked by the red arrow in the attached image is the midpoint of the PMOD connecter? Thanks!

Navigation

[0] Message Index

[#] Next page