Author Topic: TE0701-06 and Video  (Read 932 times)

JS

  • Active Member
  • *
  • Posts: 32
  • FPGA-Design & Signal Processing
TE0701-06 and Video
« on: June 23, 2021, 06:48:09 PM »
The  TE0701 shows a HDMI video jack and also the explicitly given difference to the downsized version mentiones HDMI Video. For some reason it is not mentioned on the website describing the board:
https://shop.trenz-electronic.de/de/TE0701-06-Traegerboard-fuer-Trenz-Electronic-4-x-5-Module?c=260

Is there a special issue?

I'd like to use it together with an ARTIX 5x4 sized (I need a "200" now for a video project).

In the docs I found the ADV7511KSTZ as transmitter. How many Pins are connected? Ist that a 8Bit or 10Bit connection?
(I found the transmitter in the doc on page 9 of 51 and found CLK, HS,VS,De and such but somehow cannot find the connection of the colour data R,G,B).
thx




JH

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1997
Re: TE0701-06 and Video
« Reply #1 on: June 24, 2021, 06:37:49 AM »
Hi,
we haven't any design for artix device only but we use this together with Zynq device. Online Documentation and download to the project:
https://wiki.trenz-electronic.de/display/PD/TE0720+HDMI701

You can try to port it to artix device

TE0701 Schematics:
https://shop.trenz-electronic.de/en/TE0701-06-Carrier-Board-for-Trenz-Electronic-4-x-5-Modules?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0701/REV06/Documents

page 12 --> 12 Data Pins are connected

br
John

Antti Lukats

  • Hero Member
  • *****
  • Posts: 542
Re: TE0701-06 and Video
« Reply #2 on: July 01, 2021, 11:53:04 AM »
The  TE0701 shows a HDMI video jack and also the explicitly given difference to the downsized version mentiones HDMI Video. For some reason it is not mentioned on the website describing the board:
https://shop.trenz-electronic.de/de/TE0701-06-Traegerboard-fuer-Trenz-Electronic-4-x-5-Module?c=260

Is there a special issue?

I'd like to use it together with an ARTIX 5x4 sized (I need a "200" now for a video project).

In the docs I found the ADV7511KSTZ as transmitter. How many Pins are connected? Ist that a 8Bit or 10Bit connection?
(I found the transmitter in the doc on page 9 of 51 and found CLK, HS,VS,De and such but somehow cannot find the connection of the colour data R,G,B).
thx

you need to study the ADV datasheet  a lot to understand the color mapping, several schemes are supported.