Author Topic: test camera using TE0726-03M  (Read 112 times)

Gloria

  • Active Member
  • *
  • Posts: 18
test camera using TE0726-03M
« on: April 06, 2021, 01:39:44 PM »
Hi,
I also want to use the sensor_config.h and rpicam.c in vitis, and I replace the iic_write/read_reg.
However, the project does not work.
I have a few questions.
Do I need add and constrain the CSI GPIO0 and GPIO1?
My camera is IMX219 and the address in the demo is 0x36 and 0x10?
The address seems to be wrong...
The IIC MUX address is 0x70, how should I get the address of IIC of CSI?
Thank you very much!
Looking forward to your reply!

JH

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1623